Vertical Sheer Installation - Outside Mount

Before installing your new Veneta custom sheer shade. Please make sure you have the hardware required. Start by attaching the raceway mounting brackets onto the ends of the raceway. If your shade is 40in wide or more, attach the middle mounting brackets provided, install the raceway above the window, opening the screws should be a minimum of three quarter inch above the window edge. Security screws into the middle holes of the raceway first, then secure the screws on the left and right side, enter the shades, clutch end into the tongue with the corresponding raceway mounting bracket. Press the end, plug into the hole the raceway mounting bracket on the opposite side, slide the lock pin downward. Using a flat headed screwdriver, Attach the fascia or balanced brackets horizontally into the raceway group. Then turn the brackets 90° slide the clips into the channel of the back of the fascia or balance, attach the fascia end caps. If you're installing your shade with the fabric, balance with returns, then attach the returns to the balance, attach the fascia to the raceway aligned fascia clips to the fascia brackets and then push the clips into the brackets. The fascia height can be adjusted by sliding the fascia or balance up and down, Install the court safety device using 22" flathead screws. The court should be fully extended upon installation of the device. Congratulations on installing your gorgeous new veneta sheer shade. We know they'll make your home glow to get yours today. Shop online at home depot dot com slash blinds or visit the custom shade area at your local Home Depot store.